SIGMA KNEADERS MIXER

---

We are a wealthy manufacturer and exporter of Kneader Mixer that is manufactured by our experts using best rating raw materials by custody in intelligence the set industry superiority standards. It is used in food industry, pharmaceutical industry, soap industry and chemical industry at large. These are used to resolve the reason of mixing and manipulation extremely sticky materials. Customers can gain form us an elite collection of Sigma Mixers.

CONSTRUCTION:

Sigma Kneaders comprises of a double ~U~ shaped container welded and machined together inside which rotate two ~Z~ shaped Sigma Blades in opposite directions at 2 different RPM i.e. 36/50 RPM. The clearance between the blades and the walls of the container are kept to the minimum to ensure maximum efficiency in the kneading and mixing action. The shafts of the Sigma Blades are fitted in bearing blocks which are each provided with roller bearing, steel glands, Teflon/rubber seals for smooth and leak less running. Lubricating points are provided for continuous lubrication of the shafts. A hinged type cover with locking bolts is provided for charging the kneader. The Kneader is mounted on a sturdy base frame fabricated out of ISMC section and free from vibrations. The machine is provided with a normal M.S. Jacket arrangement for heating or cooling as required.The machine is available having all contact parts in M.S. as required.
TILTING:

The Kneader can be tilted by means of a mechanical operated hand lever provided to tilt the container from 0-110 Degree even during running condition.
DRIVE:

The drive consists of a 3 ph, 415 V, TEFC Electric Motor coupled to a horizontal Worm reduction gear box which drives the finely cut helical gears enclosed in a M.S. guard. The Drive is complete with base frame.

FINISH:


All steel parts are painted with 2 coats of metal primer and enamel paint.
TECHNICAL SPECIFICATIONS
BRIM VOLUMETRIC CAPACITY LTRS
WORKING CAPACITY LTRS
SHELL SIZE
SHELL THICKNES
SIDE PLATE MS WITH SS – 304 CLADDING
BODY STRUCTURE SIZE
JACKET TYPE FOR COOLING
TILTING TYPE
MAIN MOTOR HP CROMPTON
REDUCTION GEAR BOX RADICON MAKE
RATIO OF DRIVE SHAFT
CONTACT PARTS M.O.C
NON CONTACT PARTS M.O.C
MODEL    TOTAL VOLUMETRIC CAP. IN LTRS.    HP    HYDRAULIC TILTING HP
RD6    6    1.5    N.A
RD    25    3    N.A
RD    50    5    N.A
RD    125    10    N.A
RD    225    20    1.5
RD    500    30    2
RD    1000    60    3
RD    1500    75    3
RD    3000    300    7.5

Note : Working capacity to be calculated @ 60% of Total Capacity.

Please see our Machine Video's on the youtube channel 

https://www.youtube.com/user/hitenks